Ai 50L SolventVap Rotary Evaporator w/ Chiller & Welch Pump

Description

The newly re-designed Ai SolventVap 50L (evaporating flask capacity) series rotary evaporators come with all PTFE valves for solvent-resistant operations. We also lowered the height of assembled unit, for easy installation and ease of use and storage. Also come with them are vertical glassware and digital temperature/rotation control. Its optimized bath volume allows for rapid heat-up times. The condenser unit has specially designed glass tubes that utilize surface area extremely efficiently. That’s why our SolventVap evaporators consistently deliver reliable and reproducible process results that are usually reserved for more costly systems. Another important aspect of the SolventVap is the safety features, which includes dry-run protection, water bath over-temperature shut-off protection, and fuse protection.

Rotary evaporator features a specially designed motor and worm gear, which provides constant rotation at speeds from 10 to 180 rpm. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, which is caused by the gentle heating from the water bath. The rotating system is fitted with a special seal that allows the apparatus to be placed under vacuum, effectively reducing the boiling point of the solvents and removing the vapor phase, making the process much more efficient. Each unit is also equipped with an easy-to-use vacuum release and a continuous feed system, which allows solvent to be constantly drawn into the rotating flask without needing to stop the operation.

Digital water bath operates from ambient temperature to 99°C (210°F) with PID temperature control stepping at 0.1°C increments. Heating coils are located directly inside the pan for the most efficient heating possible. A built-in overheat protector will shut down power, should the controller fail.

Standard Glassware Set includes 50L round-bottomed evaporating flask, 20L round-bottomed receiving flask, and vertical condenser. Rotary evaporators with vertical glass condenser are great for distillation of solvents with higher boiling points.

Features

• Now includes a stainless steel 50L evaporating flask carrier with silicone cushions (a $399 value), custom made for Ai 20L SolventVap series rotary evaporators. This carrier can be placed on top of our 20L SolventVap’s water bath for easy loading and unloading. It can also be used as a flask stand.
• New swivel casters can be adjusted for rotovap to stand securely on uneven floor.
• Water bath cover gives you uniform temperature inside evaporation flask as well as energy saving by reducing heat loss. It also creates a better lab environment by preventing heat and humidity from escaping.
• Solvent-resistant PTFE and Viton gaskets, ensuring long time operation.
• Specialized motor with extremely compact, intermeshed worm and worm gear provides precise driving for very quiet, vibration-free operation.
• Downward-condensing vacuum connection design ensures safe vacuum operation.
• Motorized water bath lifting for precise control.
• Easy, straight-forward visual operation with digital speed and temperature display.
• PID temperature controller ensures accurate temperature control is maintained.
• One year warranty on rotary evaporator except for glassware and all sealing gaskets.

Includes:

Ai 220V -30°C 40L capacity recirculating chiller and accessories

Welch 220V 2163 6.1 cfm 6 torr 8-head diaphragm pump and vacuum hose

Ai plexiglass water bath cover for SolventVap 50L

DigiVac vapour pressure controller (+2,300.00)

Specifications:

Electrical requirements – 220V 50/60Hz single phase, 29A, 6400 watts (rotation speed: 400 watts)

Glass material – High borosilicate glass 3.3

Evaporating flask – 50 liters – max load 60%

Rotation speed – 10 to 110 rpm

Evaporating speed – 7.5L/hour (water), 15L/hour (alcohol)

Receiving flask – 20L

Condenser – Dual-circulating coils, vertical – Main condenser 11,500 cm² or 12.4 sq ft – Auxiliary condenser 4,000 cm² or 4.3 sq ft

Working environment – 5 to 95°F

Water bath – ambient to 99°C (210°F) – digital controls – 22.1″ diameter x 12.2″ depth – three heaters

Vacuum – < 3 torr

Safety – Dry-run, over-temp shut-off, built-in circuit breakers

Shipping weight –  525 Lbs

Shipping dimensions – 52 x 30 x 92″ (fully assembled) / 46 x 28 x 58″ (Evaporator), 41 x 34 x 32″ (glassware)