Ai 5L SolventVap Rotary Evaporator w/ Chiller & Pump 220V

Description

The newly re-designed Ai SolventVap 5L (evaporating flask capacity) series rotary evaporators come with all PTFE valves for solvent-resistant operations. As well as vertical glassware and digital temperature/rotation control. Its optimized bath volume allows for rapid heat-up times. The condenser unit has specially designed glass tubes that utilize surface area extremely efficiently. That’s why our SolventVap evaporators consistently deliver reliable and reproducible process results that are usually reserved for more costly systems. Another important aspect of the SolventVap is the safety features, which includes dry-run protection, water bath over-temperature shut-off protection, and fuse protection.

Rotary evaporator features a specially designed motor and worm gear, which provides constant rotation at speeds from 10 to 180 rpm. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, which is caused by the gentle heating from the water bath. The rotating system is fitted with a special seal that allows the apparatus to be placed under vacuum, effectively reducing the boiling point of the solvents and removing the vapour phase, making the process much more efficient. Each unit is also equipped with an easy-to-use vacuum release and a continuous feed system, which allows solvent to be constantly drawn into the rotating flask without needing to stop the operation.

Digital water bath operates from ambient temperature to 99°C (210°F) with PID temperature control stepping at 0.1°C increments. Heating coils are located directly inside the pan for the most efficient heating possible. A built-in overheat protector will shut down power, should the controller fail.

Standard Glassware Set includes 5 liters round-bottomed evaporating flask, 3 liters round-bottomed receiving flask, and vertical condenser. Rotary evaporators with vertical glass condenser for are great for distillation of solvents with higher boiling points.

Features

• Solvent-resistant PTFE and Viton gaskets, ensuring long time operation.
• Water bath cover gives you uniform temperature inside evaporation flask as well as energy saving by reducing heat loss. It also creates a better lab environment by preventing heat and humidity from escaping.
• Specialized motor with extremely compact, intermeshed worm and worm gear provides precise driving for very quiet, vibration-free operation.
• Downward-condensing vacuum connection design ensures safe vacuum operation.
• Motorized water bath lifting for precise control.
• Easy, straight-forward visual operation with digital speed and temperature display.
• PID temperature controller ensures accurate temperature control is maintained.
• One year warranty on rotary evaporator except glassware and all sealing gaskets.

Includes:

Ai 220V C30-10 -30°C/-22°F 10L capacity recirculating chiller & fittings

ULVAC 220V 1.6 cfm 7.5 torr 2-stage PTFE diaphragm pump & fittings

JKEM DVR-200 Digital Vacuum Regulator (+1,700.00)

Specifications:

Electrical requirements – 220V 50/60Hz single phase, 2300 watts (rotation motor: 300 watts)

Glass material – High borosilicate glass 3.3

Evaporating flask – 5 liters – max load 60%

Rotation speed – 10 to 140 rpm

Evaporating speed – 2L/hour (water), 4L/hour (alcohol)

Receiving flask – 3L

Condenser – Dual-circulating coils, vertical – condensing surface 2,780 cm² or 3 sq ft

Working environment – 5 to 95°F

Water bath – ambient to 99°C (210°F) – digital controls – 11.4″ diameter x 6.7″ depth x 9″ height – one heater

Vacuum – < 3 torr

Safety – Dry-run, over-temp shut-off, built-in circuit breakers

Shipping weight – 105 Lb (evaporator), 57 Lb (glassware)

Shipping dimensions – 30″ x 15.7″ x 42″ / 29 x 17 x 35″ (evaporator), 22″ x 22″ x 22″ (glassware) (LxWxH)